SKY RC T120 Pico charger 2x60W

The SKY RC T120 Pico 2x60W dual-channel charger was designed to provide everything needed to charge two batteries simultaneously "under one roof", including a power supply, and with very simple operation. Its main advantage is its small, compact, upright case that takes up minimal space on your workbench — about the size of your palm.

The T120 Pico allows you to charge common battery types (NiCd, NiMH, Li-Po, Li-ion, Li-Fe, Li-HV, Pb); in addition, both channels are equipped with built-in four-channel balancers, which ensure very safe and convenient charging of lithium batteries.

It stands out from standard 50–60W chargers thanks to its truly intelligent software, which offers features previously found only in “machines” in much higher price ranges, yet is designed for practical users who purchase a charger to charge batteries, not to gaze at pretty pictures on the display of a fancy smartphone:

• a program for new types of “high-voltage” LiHV lithium batteries with a charging cut-off voltage of up to 4.35 V
• programs for charging maintenance-free AGM lead-acid batteries and for charging lead-acid batteries at low temperatures
• Setting the charging cut-off voltage for lithium batteries (allows for gentler charging, which pilots prefer, or, conversely, aggressive overcharging, favored by car enthusiasts)
• Setting the charging cut-off voltage for lead-acid batteries
• Measurement of total voltage and individual cell voltages (for lithium batteries) even when not charging
• Measurement of internal resistance of the entire pack and individual cells (for lithium batteries)

Overview of Basic Functions and Parameters

• AC power supply 100–240 V/50–60 Hz
• For charging 6–8 NiCd/NiMH cells, 2–4 Li-ion/Li-poly/Li-Fe/LiHV cells, or 6/12 V lead-acid batteries with liquid electrolyte and maintenance-free AGM batteries
• Adjustable charging current: 0.1 A – 6.0 A; Pb: 0.8–6.0 A
• Max. charging power: 60 W per channel
• Charging termination via automatic delta-peak detection for NiCd and NiMH batteries
• Lithium and lead-acid batteries are charged using the “constant current/constant voltage” method
• Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries
• Adjustable charging end voltage for lithium and lead-acid batteries
• Three charging modes for lithium batteries—fast charging (with or without a balancer), charging with a balancer, and storage charging (if discharging is required to bring the battery to storage voltage, a balancer must be connected — otherwise, the charger does not have a discharge function)
• Three charging modes for lead-acid batteries — for standard lead-acid “car batteries,” for lead-acid AGM batteries (batteries with electrodes separated by a glass-fiber separator impregnated with electrolyte), and for charging lead-acid batteries at low temperatures (-20°C to +5°C).Charging stops when the set time or charge limit is exceeded
• Measurement of total pack voltage and individual cell voltages (for lithium batteries)
• Measurement of total internal resistance of the pack and individual cells (for lithium batteries)
• DC power supply mode with adjustable voltage of 6–17 V and current of 0.5–6.0 A (max. 60 W)
• Backlit LCD display with a simple and intuitive menu and real-time parameter display during chargingA series of warning messages ensures safe operation—incorrect input voltage, improper connection, unsuitable battery or battery condition, incorrect output polarity, etc.
• Protection against reverse polarity and output short circuits.
• Compact plastic enclosure, very small dimensions—fits right in the palm of your hand
• Built-in fan for forced cooling
• Built-in power supply.

The charger is equipped with XT60 output sockets and universal sockets for JST-XH service connectors on both channels, allowing you to directly connect battery power cables and JST-XH service connectors for 2-4S packs — if you use packs with XT60 and JST-XH connectors, you can do entirely without charging cables and adapters.

Note: When charging lead-acid batteries, the charger allows you to set the cut-off voltage to 2.30–2.75 V/cell — making it suitable for charging conventional lead-acid batteries (car batteries) and gel batteries with a reversible valve, as well as gas-tight gel batteries, which must not be charged to more than 2.30 V/cell.

The charger set includes: T120 Pico charger, power cord, and user manual.