Naujos prekės
HV75K-R (0.09s/60 , 3.3kg.cm)
Very high torque/high speed programmable digital micro servo with titanium gears with one ball bearing, one oil-retaining bearing and 2 jewel bearings. The high precision no-backlash preloaded gears and flat 9 mm servo case makes it particularly suitable for controlling ailerons and flaps in F3K hand launch gliders, small gliders/hotliners amd motor models with thin wing profiles like F5D pylon racers. An aluminium case with flat mounting lugs for perfect cooling even under high loads.
Wide input voltage range 3.7-7.4 V (nominal), operational 3.5-8.4 V.
Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:
Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μs
Lock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.
Max. Duty: The duty cycle of the motor will be limited within this value.
Pulse Lower: The minimum angular range will be limited within this command value.
Neutral: The setting of the neutral position.
Pulse Upper: The maximum angular range will be limited within this command value.
Servo dimensions | Micro |
Servo type | Digital |
Programmable | Yes |
Torque at 3.7 V [kg∙cm] | 1.4 |
Thrust at 6.0V [kg∙cm] | 2.3 |
Thrust at 7.4V [kg∙cm] | 2.8 |
Torque at 8.2 V [kg∙cm] | 3.3 |
Speed at 3.7 V [s/60st.] | 0.21 |
Speed at 6.0V [s/60st.] | 0.13 |
Speed at 7.4V [s/60st.] | 0.1 |
Speed at 8.2 V [s/60st.] | 0.09 |
Control pulse width in neutral [µs] | 1520 |
Frame Rate [Hz] | 333 |
Deadband [ms] | 0.001 |
Servo gears | Metal |
Ball bearings | 1× |
High-voltage | Yes |
Power supply [V] | 3.7 - 8.4 |
Length [mm] | 23 |
Width [mm] | 9 |
Height [mm] | 16.7 |
Weight [g] | 7.5 |
Intended for | Aeroplanes,Helicopters |
DALYS IR PRIEDAI